How to Plan Your Docking Drawer Project
Every Docking Drawer Blade Series project starts by identifying your drawer box type. There are four basic drawer types to choose from - Shallow, Tall, Narrow, and Vertical. After identifying your drawer box type, measure the drawer box width (OD) to confirm the drawer is wide enough to accommodate a Docking Drawer Blade Series outlet. The required minimum dimensions can be seen here.
Project Planning in Canada
Docking Drawer outlets are ETL Listed for use in Canada. To plan your project, follow the planning details above and consider the following to comply with the CEC*:
- In-Drawer USB Charging Stations for Canada: Specify a Docking Drawer Blade Duo (1514-288) or Blade (1514-180) outlet with USB-C and/or USB-A ports only. Because USB ports are low voltage, the outlet can remain powered on and charge devices even when the drawer is closed.
- In-Drawer AC Outlets for Canada: Specify a 20 amp Docking Drawer Blade Duo or Blade outlet paired with the Safety Interlock Outlet with Blade Limit Switch (6020-1000W). This solution de-energizes the AC outlet as the drawer begins to close, making it safe for use in locations like bathroom vanities.
*The Authorities Having Jurisdiction (AHJ) has the final say on whether an installation meets the requirements of the Canadian Electrical Code.
Do I Need a 15 or 20 amp Docking Drawer Blade Series Outlet?
We often get asked this when it comes to choosing the right outlet for your drawer, especially when it comes to bathroom vanity projects where the outlet is used to power hair dryers and curling irons. See the answer here.
How do I ensure my Blade Series outlet is GFCI protected?
If a Blade Series outlet is installed in a location that requires GFCI by code, there are 4 ways to install the outlet to have GFCI Properties. See the 4 ways here.