Appliance Garage Pocket Door Outlet Solution

What's Included in Your Pocket Door Solution

Safety Outlet

Includes a Safety Disconnect that wires in series with two included AC outlets (4 receptacles total) to safely connect up to four devices.

Magnetic Switch

A reliable, non-contact switch that works with the Safety Disconnect to automatically power off when the doors are closed — ensuring safety, CEC compliance, and peace of mind.

Additional Magnetic Switch

For two-door setups, an extra switch ensures power only turns on when both doors are fully open, keeping your appliance garage safe and compliant.

How to Locate the Safety Disconnect

Our modular system offers flexible options to configure placement based on your project's design needs:

• The Safety Disconnect can easily install in a triple-gang juncition box with the two included AC outlets.
• For a more concealed setup, the Safety Disconnect can be installed in a cabinet below while placing the outlets above for a clean, seamless look.

How to Locate the Switch

For the cleanest look and simplest installation, we recommend placing the magnetic switch in the lower corner of the appliance garage—left or right—keeping the setup discreet and consistent. For pocket doors, the switch is most commonly mounted in the back of the cabinet behind the pocket door.

• For two-door designs, one switch is installed behind each door so that power only turns on when both doors are open.
• The magnet may be recessed into the door with the included screw for a minimal finish.
• Switch placement is flexible and can be at the top, bottom, or middle of the opening, as long as the magnet and switch align within ½″ (up to 1″ with larger magnets) when the door is closed.
• When the door is fully open the magnet nears the switch, the switch activates and automatically powers on the outlets.