Safety Interlock Disconnect with Corner Mount Switch
Switch Activation
Switch Finish
Enhanced Safety Layer
Specifically crafted for in-cabinet appliance garages, the Safety Interlock Disconnect supports installation with up to two receptacles, enabling power connection for as many as four devices. When the appliance garage door closes—hiding appliances like toasters, coffee makers, juicers, or mixers—the corner-mounted switch senses the door’s position and cuts power, thereby reducing potential hazards while complying with CEC guidelines for high voltage outlets within the cabinet in Canada.
Versatile Project Compatibility
This product offers greater adaptability compared to our other solutions. Although it requires some planning and setup, it allows powering more devices (up to four) and can be paired with either a 15 or 20 amp standard or GFCI outlet, giving you more flexibility for your installation.
The Safety Interlock Disconnect combines safety and adaptability. It houses a robust relay capable of managing continuous power up to 20 amps, ensuring dependable operation. Whether your project calls for a 15A or 20A receptacle, this outlet accommodates both, provided local electrical codes are followed. Additionally, it supports electric motors up to 2 horsepower, enhancing its range of applications.
Intelligent Operation
Docking Drawer provides two switch variants: one that cuts power when pressed and another that supplies power when pressed. These switches detect the door’s movement; as the door engages the switch, it either disables or activates power to the Safety Outlet and attached devices. The Corner Switch is designed with a slim profile to avoid interfering with appliance space inside the cabinet.
Compliance with Electrical Codes
This product meets the National Electrical Code (NEC) requirements in the United States and is certified to UL 498 and CSA 22.2 #42 standards. It also carries ETL Listing for use in both the US and Canada, confirming its safety and regulatory compliance. The final determination of compliance with the Canadian Electrical Code rests with the Authorities Having Jurisdiction (AHJ).
Disconnect Specs
- Input: 100 - 125 VAC, 50/60 HzAC
- Output: 20A @ 125 VAC, 2500 VA MAX, 2 HP
- Number of Receptacles: (0)
- Tamper Resistant: Not Applicable
- LED Indicator: No
- Conformance: UL60730, UL498, EN 61558, EN60730, EN62386, CSA C22.2#42
- Environmental: -10C to +50C, non condensing
- Warranty: 2 Years
Switch Specs
- Type of Switch: Corner Mount Switch
- Switch Cable: 6 ft 24 VDC low voltage cable
- Switch Length: 1" (25.4mm)
- Switch Width: 1" (25.4mm)
- Switch Height: 1" (25.4mm)
- Mounting Details: Can install in the corner of any cabinet or enclosed space behind the hinged side of the door
- Conformance: UL60730, UL498, EN 61558, EN60730, EN62386, CSA C22.2#42
- Warranty: 2 Years
Return Policy
60 Days
What Our Customers Are Saying
- KKKatharine K.Verified BuyerI recommend this productRated 5 out of 5 stars1 year agoSimple safety feature for in-cabinet countertop oven
We used this with Ikea cabinets so that our countertop oven/air fryer that we put in a large cabinet cannot be used when the door is closed. We used Ikea doors and a piano hinge to create a DIY bifold type door that is out of the way while using the appliance and this door switch shuts off the outlet when the door is closed. We've been using it for over a year and love it!
Was this helpful? - CTChris T.Verified BuyerRated 3 out of 5 stars2 years agoOkay so far, plastic frame should be steel
Just installed the switch, but the plastic frame that the face plate attaches to has brass (?) threads for the faceplate screws and mine immediately stripped, so now it’ll have to figure out a different way to attach the faceplate. For the price, steel would probably have been more durable. I also don’t love the stab connectors for security, pigtails would be more robust but the screw doesn’t come out far enough.
Was this helpful?DDDocking Drawer Canada2 years agoChris, thanks for the important feedback on the disconnect product. First off, we’ll replace the unit due to the stripped cover plate mounting screw. I’ll investigate using steel in the next batch. As for the stab, they connectors should be secure as they have an internal locking plate that secures the wire. I’ll send you some pictures of the locking mechanism. Thanks for the feedback. Scott
All Content © 2023 Docking Drawer a division of JTech Solutions Inc. 12893 Alcosta Blvd, Suite M, San Ramon, CA 94583