Why isn’t my Blade Outlet Powering On/Off as Expected?

If you have a Blade Series in‑drawer outlet paired with a Safety Outlet with Blade Switch, and it’s not working as expected, here’s the number one tip to get your project back on track:

The #1 reason the Blade outlet doesn’t power on/off as expected is because
the Blade Switch is not mounted in the correct location.

Troubleshooting: Verify the Location of Your Blade Switch

The Blade Switch MUST be mounted to the rear mounting bracket of your Docking Drawer Blade Series outlet.

Blade Limit Switch

The Blade Switch is designed to measure the movement of the cable management arms. It is adjustable so you can fine‑tune exactly when the outlet powers on/off as the drawer opens and closes. Correcting the switch location usually solves the issue immediately.