Go to US Store
Looking for our best resources?
Here are all of our Downloads & Resources
Showroom Mockup Outlet
from $13.00 CAD
The Blade Series Non-Functioning Mockup brings the industry's most-specified in-drawer outlet to your showroom floor with no electrical required. Available in four finishes and two configurations, it installs in minutes.
Trade Partners save 50% on mockup orders for qualified showrooms, just call our team at (866) 806-7228 to get yours today.
Installation Tool for Tight Spaces
$61.00 CAD
Designed for precision and speed, this optional tool simplifies Blade and Trio Series installations by ensuring perfect rear bracket alignment—key to smooth cable management arm performance. Ideal for tight spaces, high-volume manufacturing, or detail-focused installers, it’s a game-changer when access is limited or accuracy matters most. Whether on the factory floor or in the field, this tool boosts efficiency without changing our proven installation process.
Installation Process
Â
Fully extend the rear mounting bracket locator and tighten the 2 thumb screws to secure it in place.
Locate the mounting fixture into the right side of the receptacle box cutout and tighten the thumb screws to lock the mounting fixture in position.
Firmly close the drawer box, which will press the sharp screws into the back wall of the cabinet, leaving precise indentations that mark the perfect spot to install the rear mounting bracket.
Remove the screws from the tool and install the rear mounting bracket of the in-drawer outlet at the marked locations using those same screws.
Â
Low-Voltage Cable Management Arms
from $428.00 CAD
INTENTIONAL DESIGN: Designed to guide low-voltage cables within moving mechanisms like a drawer.
POPULAR APPLICATIONS: Ideal for in-cabinet lighting, telephone cords, security systems, alarm keypads, and networking cables.
FLEXIBLE INSTALLATION: Features easy cable routing with included zip ties and a quick-release pin for simple removal of the 13" arm from drawer box.
WARNING -Â Not for use in high-voltage electrical applications. These cable management arms are exclusively designed for low-voltage cables and will NOT work with 120V, 14 gauge cable size.
Replacement Cables
$19.00 CAD
If you need an additional 10' 22 AWG cable for your Safety Interlock Disconnect or Interlock Installation*, simply order a replacement above (Safety Interlock Outlet is not included).
*If the replacement cable is being used for a Fire Guard application, please call (866) 806-7228 for more information.
Smoke & Heat Sensor Switch
$78.00 CAD
This is a replacement switch for our Fire Guard Outlet. The Smoke & Heat Sensor Switch signals the outlet to disconnect power at the first sign of smoke or rapidly rising heat. This replacement part is ideal for:
Replacing a lost, broken, or missing switch for the Fire Guard Outlet
Custom setups where multiple switches must work together to signal a single outlet
Blade Series Spacer
$53.00 CAD
Docking Drawer outlets are designed to seamlessly fit into drawers with at least 2 inches of space behind the drawer box. For applications with less space—often found in closet or inset cabinets—you can use the spacer technique to install into as little as 1.25 inches of space behind the drawer box. Purchase our custom-made spacer here, or learn how to create your own in our Spec Book.
Note: The drawer box cutout is slightly larger than the outlet cut out in the spacer to make room for the Blade Series outlet arms that extend into the drawer box.
15 amp Blade Series with 10' Cords
$672.00 CAD
Docking Drawer 15 amp Blade series outlets with 10' cords are perfect for furniture applications. Compared to our standard 4.5' cord, these outlets include an extended cord to easily reach behind headboards or be discreetly guided down furniture legs.
Can't find your desired configuration? Give us a call at (530) 205-3625.
Magnetic Switch with Extended Cable
$135.00 CAD
Call (866) 806-7228 for Current Lead Time
Flexible Cable Length Options for Any Project. Now available in 10', 15', and 20' lengths, this Magnetic Switch is designed to work seamlessly in any project and every appliance garage. The extended cord options make it easy to route wires cleanly and discreetly, allowing for a fully concealed, professional installation—even in larger or more complex cabinetry layouts.
Browse our comprehensive wiring diagrams and technical documentation for guidance on both single- and multi-switch setups. Our solutions are highly adaptable and can be customized for an endless range of applications—if you can imagine it, we can make it possible.
Â
Silicone Canister Band
$3.00 CAD
Bring polish and stability to your Docking Drawer setup with our Silicone Canister Bands—the small detail that makes a big difference. These flexible, heat-resistant bands create a snug, rattle-free fit that keeps Docking Drawer Canisters securely in place, even in angled drawers. They also make installation simple—just add ¼″ to your cutout size and drop the canister in from above, no underside access required. Perfect for new builds or retrofits, they deliver a clean, quiet, and professional finish to any vanity or styling station.